PUR 2-Stage Vertical White Faucet Mount FM-3333B Review

Average Reviews:

(More customer reviews)I picked up one of these (FM3333) for my office. One thing that caught my eye is that it included a 2-stage filter. We have used a single-stage on-tap filter by another maker in the past, but it clogged up too quickly, so having a filter that could trap sediment was an important consideration.

The filter holder installed on the faucet effortlessly without any tools. Our faucet has exterior screw threads, so the faucet adapter included in the package wasn't needed.

The filter itself took a little extra effort to insert into the filter holder. It seemed to be a very tight fit (but not an improper fit).

Filtered water comes out the bottom not really in a stream or a spray, but somewhere in between.It comes out at a slower rate than unfiltered, but I expected that.It's an adequate rate, not a trickle by any means.

Controlling the filter couldn't be simpler or more pleasant.Tip it backwards to bypass the filter, tilt it straight up again to filter again.The tilting action feels very smooth, no feeling of cheap-plastic friction.

Another nice feature is the gauge that shows roughly how much use is left before the filter needs to be changed.It's purely mechanical, no batteries necessary.

I recommend the Pur without hesitation.

Click Here to see more reviews about: PUR 2-Stage Vertical White Faucet Mount FM-3333B

Product Description:

The improved, next generation of PUR faucet mounts is at your service. With a one-year warranty, high-quality construction, 1-click installation, and easy push-button removal, there's never been an easier or more reliable way to get PUR filtered water. Each PUR 2 stage filter gives you 100 gallons of clean, healthy, great-tasting water.

Get 67% OFF

Want to read more honest consumer review about PUR 2-Stage Vertical White Faucet Mount FM-3333B now ?

Brita 42633 Faucet Filtration System, Black/Chrome Review

Average Reviews:

(More customer reviews)I may be reiterating what many of the reviewers before me have said, but I may have a few helpful points to add.

First, they should have never used plastic adapters.Kitchen faucets with internal threads are quite common and the likelihood is high that you will have to use one of the included adapters to attach the filter to that kind of faucet.The plastic threading simply can't withstand the water pressure that will inevitably push on it when you turn the water on all the way.

It would have been very easy for them to use quality steel parts, and I'm sure most people would have been happy to even pay $5-10 more for something that will actually last.It is especially surprising that they would cut corners on a product where the real profit comes from the replacement filters rather than the original purchase.Who knows what they were thinking (or if they were thinking at all), but this product simply doesn't work when setup correctly.

The use of plastic is not where the problems end, however, because there is literally less than a half an inch of exposed threading within the top portion of the adapter.The adapters themselves also have around a quarter inch of threading.This is really a shame, because even using a weak material like plastic might be sufficient if they had enough threads engaging to strengthen the connection.

That said, if you are set on using this product (or forced to), here are a couple of things you can do to help alleviate the problem.I've gotten mine to work long enough for me to order something from one of their competitors.

- Turn the water pressure down on your faucet.In case you don't know how, there are usually two levers (one hot, one cold) underneath your sink that control the water supply.Try tightening them until the water flow is slow enough that it won't blow the filter off.

- Try epoxy or a similar plastic bonding agent.I used epoxy to bond the adapter to the filter mount.You can then screw it on by holding the rotating ring in place.This is an irreversible and permanent solution, but it will make it so that there is only one point that will leak.

- Another poster suggested you can contact Brita to get a metal replacement adapter.That may be a good solution.However, keep in mind that you will still have to screw the metal adapter into a short length of plastic threading.That may simply shift the weakest point to a different part of the mount.

Click Here to see more reviews about: Brita 42633 Faucet Filtration System, Black/Chrome

Product Description:
You can now get clear, refreshing Brita water right from your tap, and this convenient faucet filtration system features sleek chrome detailing to go with your kitchen d??cor. It works to eliminate 99% of lead and reduce chlorine, bad tastes and odors. It resists bacteria growth and reduces sediment and water hardness. The system is easily attached to your faucet with no tools necessary. The filter is easily replaced after 100 gallons or 4 months, whichever comes first. Switching from filtered to unfiltered water is easy as well. The electronic LED filter replacement indicator flashes red to let you know when the filter is ready to be replaced.Features Include:Fits on your faucetLED filter indicatorEliminates 99% of leadImproves taste and odorEasy to attach

Get 6% OFF

Want to read more honest consumer review about Brita 42633 Faucet Filtration System, Black/Chrome now ?